Galaxy Gallery

click on photos to see more examples of recently completed projects

When deciding on your replacement windows and which company to purchase from, it is always helpful to be able to understand their unique language. The glossary of terms that follows provides some of the common terms associated with replacement windows that you may encounter when reviewing companies and products.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A	Back to top
Air Chambers	Small honeycomb spaces within the sash and frame which help to insulate and strengthen the window
Air Infiltration	The amount of air that passes between a window sash and frame. In windows it is measured in terms of cubic feet or air per minute, per square foot of area. The lower the number, the less air the window lets pass through.
Air Latch	Latch mechanism on the interior face of the sash that retains the window in a partially open position for ventilation.
Angled Exterior	A sloped extension from the frame that adds an aesthetically-pleasing dimension to the exterior of the window.
Argon Gas	An odorless, colorless, tasteless, nontoxic gas which is six times denser than air. It is used to replace air between the glass panes to reduce temperature transfer.
Awning Window	A top-hinged window that swings outward for ventilation.

B	Back to top
Balance System	Device for holding vertically sliding sash in any desired position through the use of a spring or weight to counterbalance the weight of the sash.
Bay Window	An angled combination of three windows that project out from the wall of the home. The windows are commonly joined at 30- or 45-degree angles.
Beveled Exterior	An angled extension from the frame that adds an aesthetically-pleasing dimension to the exterior of the window.
Bow Window	An angled combination of windows in 3-, 4- or 5-lite configurations. The windows are attached at 10-degree angles to project a more circular, arced appearance.
Butyl	A rubber material that seals the glass to the spacer, creating an airtight and watertight IG unit. Butyl has the lowest gas permeability of all rubbers.

C	Back to top
Cam Lock and Keeper	The mechanisms which pull the sash together when placed in the locked position.
Capillary Tubes	Small hollow tubes which penetrate the spacer system of an insulating glass unit. They allow pressure equalization between manufacturing locations, shipping, and installation locations. Since the insulating glass unit is not permanently sealed, the air space cannot be filled with Argon gas.
Casement Window	A window with a side-hinged sash that opens outward for ventilation.
Center of Glass U- and R-values	The U- and R-values measured from the center of the glass to 2-1/2" from the frame.
Condensation Resistance Factor	A measure of the effectiveness of a window or glazing system to reduce the potential for condensation. The higher the condensation resistance factor, the more efficient the window and glazing system.
Conduction	Energy transfer from one material to another by direct contact.
Convection	Heat transfer by currents that flow from a warm surface to a colder one.
Coved Exterior	An arced extension from the frame that adds an aesthetically-pleasing dimension to the exterior of the window.

D	Back to top
Dead-air space	The space between the panes of glass of an I.G. Unit.
Deadlite	A piece of glass or IGU with a sash profile around it; not set within the main frame of a window unit.
Desiccant	A material used in insulating glass to absorb water vapor which causes fogging.
Double Hung Window	A window that has two operable sash which slide vertically.
Double-strength Glass	Glass with a thickness of approximately 1/8".
Dry glazing	An alternative method of placing glass in a door or window. No glazing mastic is used. Dry glazing is recommended whenever reflective coatings are glazed to first surface.
Dual-durometer	An elastomeric material with two different degrees of hardness.

E	Back to top
Egress Code	The code that requires a minimum opening of a window for persons to exit or firefighters to enter a building.
ENERGY STAR®	ENERGY STAR® is an independent U.S. government program establishing a standard set of guidelines to recognize the energy efficiency of various products. ENERGY STAR® guidelines are used in conjunction with a variety of building materials, including windows and patio doors. Over the past ten years, ENERGY STAR® guidelines have helped double the efficiency of windows they endorse
Extruded screen frame	Different from a Roll formed frame, this frame is pressed through a form or die.

F	Back to top
Fenestration	Any opening in a building's envelope including windows, doors and skylights
Fusion-welded	The process of joining materials by melting them together with extreme heat (over 500ºF), resulting in the materials uniting into a one-piece unit.

G	Back to top
Geometric	Specially designed windows classified as either Straight line Geometrics such as rectangles, triangles, trapezoid, octagons, pentagons, etc., or Radius Geometrics which include half-rounds, quarter-rounds, full-rounds, sectors, ellipses, eyebrows, etc.
Glass	An inorganic transparent material composed of sand (silica), soda (sodium bicarbonate), and lime (calcium carbonate) with small quantities of alumina, boric or magnesia oxides. Available Styles: Clear, Bronze, Grey and Tinted. · Glazing - The process of sealing the glass to the sash.
Glazing Bead	A strip of vinyl which surrounds the edge of the glass and holds it in place in conjunction with other sealants.
Grids	Decorative horizontal or vertical bars installed between the glass panes to create the appearance of the sash being dividing into smaller lites of glass

H	Back to top
Head	The horizontal top portion of the main frame.
Head expander	A vinyl shape cut the width of a product and placed on the head, fitting over it snugly. This piece is used as a filler to expand or lengthen the unit from the head and take up the gap in the opening between the unit and the opening in the unit.
Hook accessory	Accessories that snap to the hook frame and provide easy installation.
Hopper	A window with a bottom-hinged sash that opens inward for ventilation.

I	Back to top
I.G. Unit (Insulating Glass Unit)	Two or more lites of glass separated by a spacer and hermetically sealed at the glass edges.

J	Back to top
J-channel	Integral extension on the outside of a new construction window that eases installation on siding applications.
Jamb	Vertical sections of the main frame.

K	Back to top
Keeper Rail	The horizontal section of the sash where the keeper is attached.
Keeper Stile	The vertical section of the sash where the keeper is attached.
Krypton Gas	An inert, odorless, colorless, tasteless, nontoxic gas which is about 12 times denser than air. It is used to replace air between the glass panes to reduce temperature transfer and deter convection. Used when a higher performance is desired than that produced with Argon gas.

L	Back to top
Laminated Glass	Two or more pieces of glass bonded together over a plastic interlayer.
Lift Handle	A handhold for raising and lowering the sash. Handle implies that the handhold is not continuous across the sash.
Lift Rail	A handhold for raising and lowering the sash. Rail implies that the handhold is continuous across the sash.
Lite	A unit of glass in a window.
Lock Rail	The horizontal section of the sash where the cam lock is attached.
Lock Stile	The vertical section of the sash where the cam lock is attached.
Low E (Emissivity) Glass	Glass with a transparent metallic oxide coating applied onto or into a glass surface. The coating allows short-wave energy to pass through but reflects long-wave infrared energy which improves the U-value.

M	Back to top
Main Frame	The head, sill and jambs sections of a window.
Mechanically Fastened Frame	Refers to frames fastened with screws.
Meeting Rail	The horizontal sections of a pair of sash that meet when the sash are closed.
Meeting Stile	The vertical section of a pair of sash that meet when the sash are closed.
Mesh	Fabric made of either fiberglass or aluminum, used in the making of screens.
Mullion	A vertical or horizontal connecting unit between two or more windows.

N	Back to top
Nailing Fin	An extrusion attached to the main frame of a window used to secure the unit to the rough opening.

O	Back to top
Obscure Glass	Glass that has been made translucent instead of transparent.
Oriel	A window with the meeting rail located off center of the frame. Most oriels have a 60/40 configuration.
Overlapping and Interlocking Meeting Rail	A patented meeting rail which overlaps and interlocks both sash.

P	Back to top
Patio door	A glass door that slides opens and close on adjustable tandem rollers. Available in 2- or 3-lite configurations with the operable panel available in any position.
Picture Window	A window that has no moveable sash.
Pivot Alignment System	An exclusive hinge-type system used on hung windows. This system attaches the sash to the balance, creating perfect alignment between the sash and frame, while allowing the sash to tilt inward for cleaning.
Pull Handle	A handhold for sliding the sash back and forth. Handle implies that the handhold is not continuous across the sash.
Pull rail	A handhold for sliding the sash back and forth. Rail implies that the handhold is continuous across the sash.
Pull Stile	A handhold for sliding the sash back and forth. Stile implies that the handhold is continuous across the sash.

R	Back to top
R-value	Resistance a material has to heat flow. The higher the R-value, the greater the resistance.
Radiation	Wave energy transmitted directly from one object to another through the atmosphere or through transparent or translucent materials. The energy radiated is transmitted, absorbed, reflected or a combination of all three.
Rail	The horizontal sections of the sash.
Raised Exterior	An angled extension from the frame that adds an aesthetically pleasing dimension to the exterior of the window
Relative Humidity Condensation Point	The relative humidity level at which visible water vapor or other liquid vapor begins to form on the surface of the sash or frame, based on an inside temperature of 70E F and an outside temperature of 0E F. The higher the percentage, the more moisture the air can hold before condensation will occur.
Roll formed Screen Frame	A method of fabrication in which a flat (usually metal) material is placed on a machine where the material is formed into shape using differently shaped rollers and pressure.

S	Back to top
Sash	The part of the window which contains the glass.
Sash Alignment System	An exclusive hinge-type system used on hung windows. This system attaches the sash to the balance, creating perfect alignment between the sash and frame, while allowing the sash to tilt inward for cleaning.
Shading Coefficient	The ratio of solar heat that is transferred through a glazing material relative to the solar heat transferred through 1/8" clear glass. The lower the number the more efficient the window is at reducing solar heat gains.
Sill	The horizontal, bottom section of the main frame.
Sill Extender	An extrusion that is attached to the bottom of the window to cover the gap between the sill and the rough opening.
Single Hung	A window in which one sash slides vertically and the other sash is fixed.
Single-strength Glass	Glass with a thickness of approximately 3/32".
Slider Window	A window in which the sash move horizontally. Sliders are available in a 2- or 3-lite configuration, with the 3-lite having operable end vents.
Sloped sill	The sill of the window that has a downward slope to the outside. This sill has sufficient degree of slope to aid in water runoff.
Solar Heat Gain	The percentage of heat gained from both direct sunlight and absorbed heat. The smaller the number, the greater the ability to reduce solar heat gain.
Spacer	Material placed between two or more pieces of glass in order to maintain a uniform width between the glass, and prevent sealant distortion.
Stepped Sill	An exclusive triple-stepped, sloped sill design.
Stile	The vertical sections of the sash.
Stucco Fin	An extrusion used in stucco home installations that is attached to the main frame to create a smooth, finished look for both the window and the stucco.

T	Back to top
Tape Glazing	Two-sided tape used to secure and seal the glass to the sash.
Tempered Glass	Glass with a surface compression of not less than 10,000 psi, or an edge compression of not less than 9,700 psi. When broken, the glass breaks into pebbles instead of shards.
Tilt Latch	Mechanism that unlocks the sash and allows it to tilt in from the main frame.
Tilt-in/lift-out sash	A sash that can be tilted to the interior and removed for cleaning and is manufactured by welding.
Total Unit U- and R-values	The U- and R-values of the window calculated from the average of the center of glass, edge of glass and frame U- and R-values. It is the reciprocal of the R-value.
Tri-durometer	An elastomeric material with three different degrees of hardness.

U	Back to top
U-value	Amount of heat transferred through a material. The lower the U-value, the slower the rate of heat flow and the better the insulating quality.
UV Block	The percent of ultraviolet rays blocked from being transmitted through the glass. The higher the number the lower the percentage of ultraviolet rays transmitted through the window.

V	Back to top
Vent-lok	Latch mechanism on the interior face of the sash which retains the window in a partially open position for ventilation.
Visible Light Transmittance	The percentage of light that is transmitted through glass in the visible light spectrum (380 to 720 nanometers). The higher the number the higher the percentage of visible light transmitted through the window.

W	Back to top
Weather-stripping	Material used to form a weather-resistant seal around operable sash.
Weep flaps	A weep hole that is covered with vinyl flap that allows water to escape, while keeping insects out.
Weep Holes	Small openings designed to allow water to escape that might otherwise accumulate in a window's sill.
Weep Slots	Slots or holes in the sill (bottom) member of the sash frame that provides an outdoor release of infiltrated rainwater.
Wet Glazing	A silicone-based substance used to secure and seal the glass to the sash.
Wood blocks	Pieces of plywood that come in different thickness, depending on the depth of the hook of the frame. They are used to make the window flush with the opening it is filling. They are also used to assist in pre-mulling windows together and give the screw more to bite into when joining the windows.